Oil leakage is the leading cause of premature failure in track rollers and idlers, forcing most products on the market to be replaced within a year and a half—even when the roller body itself still has plenty of life left. In theory, if oil leakage were prevented, these conventional rollers could last around two years, maximizing their wear potential. But for years, customers have been dealing with roller breakage, only to find their suppliers offering no real solutions.
In this post, we’ll explain why oil leaks happen, why traditional rollers fail prematurely, and what can be done to truly solve this problem.
Table of Contents:1. The Costly Problem of Oil Leakage in Track Rollers
2. Why Oil Leaks Happen in Traditional Track Rollers
3. Everpads’ Solution: Designed to Last
4. Why Don’t Other Manufacturers Fix This Issue?
5. Our Commitment to Contractors
Many track rollers and idlers on the market are built with conventional oil-sealing systems and internal design flaws that simply can’t handle the demands of heavy machinery. These issues cause the lifecycle of these products to be cut short, often resulting in sudden, unpredictable failures. Not only does this add maintenance headaches for contractors, but it also leads to higher replacement costs over time.
For contractors, these oil leaks become a costly burden, causing downtime, increased maintenance, and more frequent replacements—all factors that interrupt job schedules and add unnecessary expenses.
Traditional track rollers often rely on a floating seal or duo cone seal system. This system uses a rubber O-ring, positioned alongside the floating seal, to create a tight seal and prevent oil from leaking. The design depends on both end caps being properly tightened to ensure the seal remains effective. However, several factors contribute to a high risk of oil leakage over time, compromising the system's reliability and performance.
Key reasons for oil leakage include:
To effectively solve the challenges associated with traditional sealing systems, we developed a unique approach. Our advanced sealing system is fully integrated with the roller body, forming a unified structure that operates independently from the installation end caps. Unlike conventional designs where end caps play a dual role—providing structural support and maintaining the oil seal—our system separates these functions. The end caps in our design are solely responsible for securing the roller onto the track chain, without impacting the integrity of the seal.
This innovation eliminates the common issues found in traditional floating seal systems, such as seal degradation due to lateral movement or wear from excessive tightening. By decoupling the sealing mechanism from the installation components, we ensure consistent performance and significantly reduce the risk of oil leaks, even under harsh operating conditions.
Here’s what makes Everpads’ solution unique:
By addressing the root causes of oil leakage and prioritizing long-lasting performance, Everpads offers a solution that outperforms traditional products, giving contractors peace of mind and reducing the frequency of replacements.
Many manufacturers choose not to address track roller failures because they assume that most contractors will replace the entire undercarriage system together. They see little value in enhancing track roller durability if the other components in the system don’t have a similarly extended lifespan. Upgrading individual components like the track rollers would require significant investment, and without improvements across all parts, they believe strengthening just the track rollers alone isn’t practical or worthwhile.
At Everpads, we take a different approach. We’ve conducted extensive research to identify the common causes of early wear and failure specifically in track rollers, as well as in all the components of the undercarriage. By addressing these vulnerabilities, we’ve developed patented solutions and upgraded our materials and production methods, resulting in a comprehensive improvement for our entire track system. Now, each component is designed to overcome early wear issues and is built with materials and structures optimized to deliver a three-year lifespan.
This commitment means that our customers receive a high-performance track roller solution designed to endure the demands of heavy machinery without compromise, providing a reliable, long-lasting solution for contractors looking to minimize downtime and maintenance costs.
At Everpads, we believe that true value means solving real challenges, not just maximizing profit. Every product we create upholds this principle because we understand the impact of reliable equipment on a contractor’s operations. You can tell a lot about a brand by the insights it shares and the lengths it’s willing to go to ensure quality.Cold Milling Machine
Oil leakage in traditional track rollers is an inherent flaw that leads to premature failures and costly replacements. By investing in a solution that nearly eliminates this problem, Everpads offers contractors an option that’s built to last and perform.
Choose Innovation. Choose Everpads.