Cutting Tools

Characteristics: Tungsten Carbide Tip, connected by a soft cobalt metal, with a hardness of more than 1400 HV, making it resistant to bending under high temperature and high impact environment. Tip is sharp and small, ensuring the taper performance when cutting into the ground, reducing cutting resistance. Large at bottom to provide protection for the tool holder. The connection strength is high, and it can withstand the bending moment caused by the 6-ton force applied to the tip at a 45-degree direction with the shank.

Material of tip: It is an alloy combined by tungsten powder and cobalt powder. Tungsten is characterized by hardness and wear resistance, while softer cobalt combines tungsten powder particles together to ensure sufficient resistance and toughness of the entire tungsten steel head.

EVERPADS’ Tungsten Carbide tip is made 22U tungsten powder made in Germany to ensure excellent quality. Hardness is between 89-90 HRC. The surface of the tip will be raised to about 95 HRC after special treatment.

 Asphalt Cutting tool:

  1. Steel Body: Made by 35Crmo anti-wear material, after cold pressing forging. The wear parts are locally heat treated to increase wear resistance. Heat treatment hardness: between 48 ~ 50HRC.
  2. Spring Clip: Made by 65Mo spring steel, 1.8mm thick, strong lasting force, can maintain a constant tension, so that the tip can rotate smoothly in the steel body. It is not easy to make the tip fall off during planner working, so that the tip can effectively reduce friction and increase wear resistance.
  3. Wear Plate: Made by spring steel, high hardness, low wear resistance, good elasticity, high temperature resistance, can effectively reduce strong collision and wear. The thickness of the tool holder is 4 mm, the diameter is 48MM, which is 4MM, which can effectively protect the tip mounting holes.
  4. Welding process: Adopt advanced high-frequency and high-temperature,
  5. Copper welding technology to ensure that the welding is firm, so that the tungsten tip will never fall off and can withstand a lateral impact of 6 tons and a half at a 45-degree angle.
  6. Product Qualification Ratio is 99.9%.

Concrete Cutting Tool:

  1. Compare to old model, new model has tip protrudes to increase the distance between the tool holder and the ground, reduce the area where the tool holder touches the ground, and slow down the force application point of the lower blade, increasing the bending  resistance.
  2. New concrete cutting tool: Increase chamfer, increase the impact force when operating and increase the bending resistance.

 

EVERPADS   ITEM

APPLICABLE   MODELS

APPLICABLE

ROAD SURFACE

Information

SHANK

DIAMETER

T1-13WD

Milling drum

With

1m Width or lower

Concrete

Wirtgen:W1-13-G

20mm

T6W

Milling drum

With

1m Width or lower

Soft to mid-hard

Wirtgen: W5, W6

ELEMENT 6: 

RM3-M6VR,RM3-MN6VR,RM3-T6VR,RM3-TN6VR,RM3-M7,RM3-MN7,RM3-M9,RM3-MN9

KENNAMETAL: RX1-01,
RX2-01,RZ1-02,RZ3-01,RZ3-02

SANDVIK: SW-26,SW-29,SW-38,S-01,S-29,S-38,K6LW

 

20mm

T6WD

Milling drum

With

1m Width or lower

Soft to mid-hard

20mm

T7WS

Milling drum

With

2m -2.2mWidth or lower

Medium hard or hard

Wirtgen: W6, W7

ELEMENT 6:

RM3-T8 ,RM3-TN8 

KENNAMETAL: RZ4-03

SANDVIK: S-68,SW-68,K6LW

 

20mm

To learn more please feel free to contact us  

More content

More detailed specifications can download files